• Two-column configurations can support 48″ to 72″ tabletops
  • Wire management optional
  • Raising/lowering speed 1 3/8″ per second
  • 43db noise level using ISO-11201:2010 acoustics
  • Features patent-pending sound-reduction technology
  • Power consumption <0.3W
  • Multiple handswitch and color options available within one order
  • Stroke length of 18.9″ (480mm) or 26 (660mm)
  • Recommended column orientation as shown. Do not mount on angle.
  • Maximum load (including table top) not to exceed 200 lb.
  • Wire-managing HAT channels and support beams available

 

PRODUCT CARE & CLEANING
Do not use any abrasive or acidic cleaning solutions. No harsh chemicals including lye or rust remover.

Powder Coat Surfaces
For Simple Cleaning: general household cleaners are safe on all powder coated surfaces
For Disinfecting*: Use a 1:10 bleach + water dilute or a 70% Isopropyl alcohol + water dilute
Any residue should remove easily with soap and water.

Laminate Work Surfaces
For Simple Cleaning:
 Damp cloth or sponge with a mild soap or detergent
For Disinfecting*: Use a 1:3 bleach + water dilute or a 70% Isopropyl alcohol + water dilute
Rinse with a damp cloth.

*Be sure to dilute to recommended instructions. Test all cleaners in an inconspicuous area to verify.

 

WARRANTY INFORMATION
Three Years: Electronic components such as control boxes, handswitches, motors.
Five Years: Mechanical components such as crank drives, spindles.
Ten Years: Structural components such as beams, feet and top supports.

Handswitch Options

 

Powder Coat Color Options

150+ colors available.

Color Quick Reference

 

 

TypeStroke Length (IN)Height Min/Max (IN)Travel Speed (IN/Sec)Max Rated Load (LB)Noise Level (DB)
Single Stage1926.5/45.51.37520043
Dual Stage2621/471.37520043

DRAWING

Standard Dimensions

  • Base depth: 29″ and 35″ (supports 24″ and 30″ tops)
  • Base Height:
    • Single Stage Electric: 27.5″ – 46.5″ (with 1″ top)
    • Dual Stage Electric: 22″ – 48″ (with 1″ top)
  • Base widths: 48″ – 72″ (6″ increments)

 

Standard Base

  • 1. Independent E-Beam
  • 2. Ganging Tube Covers

Upgraded Base

  • 3. Center Tray & Support
  • 4. Electrical System (not shown)
  • 5. End Panel Covers
  • 6. Tray Covers

Fixed, dual or single stage available.

 

 

Pin It on Pinterest